Power reset worked fine. I’ve unplugged it from the outlet and let it sit it didn’t work. Then release the button, reinsert the batteries, and then hold down the play/pause and back buttons to initiate the re-link process. The tv by it self works great, but have the "old" pastic smart remote. Still nothing. T5A 250V. If it appears to be just plugged in pull out using the plug and not the wires as you could pull them out of the connector pins if they aren't crimped strongly. Other than proving that the TV power cord is faulty or not by either disconnecting it from the outlet and the TV and testing it with an Ohmmeter or trying a compatible replacement cord, there are no other options except than to take down the TV from the wall and remove the back cover so that the power board can be inspected and tested. Unplugging/plugging the power to the tv resolves this issue. I'm tired of begging him to get proper wire or to fix it for me. I had to replace the Tv’s Mother Board. It attempts to turn on then clicks and blinks to power off and repeats. And nothing happen. The TV will then come back on. Sometimes after it flashes it just goes black. It was working this morning, turned it off. The relays are crap.. Hi, my tv was unplugged for the weekend then when id tried to plug in it wouldn't turn on. Waite 30 minutes & plug everything back in. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. These are the components that usually fail if there has been a power surge due to a storm or outage. 07/07/2019 by 02/08/2018 by and what are your abilities? If the TV is plugged intro a powerboard (powerstrip) try plugging it directly into the wall outlet and check. - edited Have you ever encounter you grab your remote control and turn your appliances on and it doesn't work you think it's just a Low Battery situation that it could be FIX, But when you change it it doesn't work at all and you give up you just toss your remote. August 16 by At first I thought it was the tv, but after observing this event multiple times, I also noticed the remote blinks multiple times by itself. 30 minutes later turned it on and it was working, tried to go to dvr menu and the picture went out, still had sound and then the sound went off too. Looks like I just fell into the same Remote ‘flashing red, not pairing, not available, tv turning on by itself in the middle of the night’ black hole I’ve seen posted about. That is important because you can compare the fuses against each other. Tried a new remote with same result. John I have tried what you suggested. Sit three minutes. help please. Check if your tv has other connection like ps3 or other hdmi connected devices. What should I do to fix the problem? a hair dryer to see if it worked or not? If the power from the wall outlet is OK then you would have to disconnect the TV from the power and remove the back cover from the TV and inspect the power board for any obvious damage. My bed remote worked until dropped and reb bulb broke. It take that long for all the power to go out of tv, 12/19/2019 by Troubleshooting your remote depends on the issue that you're having with it. oldturkey03. Hi, Was there a storm or blackout between the time when it was working and when it wasn't? Remove the battery cover and insert two new AA batteries. This statement about continuity is not accurate. Have you checked that the power outlet that the TV is connected to is working OK by plugging in another device e.g. I have nothing connected to it but my cable box hdmi. If it is OK then it may be a mainboard or mainboard/power board cable problem.